Smoking from a bong is a popular and enjoyable way to consume cannabis. However, after multiple uses, the bong can become incredibly dirty and affect the taste and quality of your smoking experience. Cleaning your bong every now and then is an important step to take if you want to maximize the quality and flavor of your hits. how to clean a bong is not a difficult process, but it does take some time and patience. You will need to gather some supplies such as rubbing alcohol, salt, pipe cleaners or cotton swabs, and warm water for the cleaning job.
The first step in cleaning your bong is to empty out all of the water from inside. Once you’ve done this, unscrew any removable parts from Dummy Vapes and soak them in rubbing alcohol for a few hours. This will help break up the resin and make them easier to remove.
Next, fill the bong with warm water and add a generous amount of salt. Plug or cover all openings so that the solution can’t escape and shake it for several minutes. The shaking will help to loosen up any stubborn resin particles.
Finally, rinse the bong with clean water to remove all of the rubbing alcohol residue. At this point your bong should be sparkling clean and ready for use once again
Once the solution has been shaken, dump out all of the water and salt and rinse the bong with running water. To get rid of those hard-to-reach areas, use a cotton swab or pipe cleaner dipped in rubbing alcohol to scrub away the residue. Make sure you get into all of the crevices and scrub away any excess resin.
In this article, we’ll take a step-by-step look at the best ways to clean your bong and keep it in top condition.
1. Gather Supplies
Before you begin cleaning your bong, make sure you have all the necessary supplies at hand. These include isopropyl alcohol (90% or higher), coarse salt, a pipe cleaner/brush, and plastic bags (for attaching to the bong’s openings). You can also use bong cleaning solutions that are available in the market, but these DIY items are readily available to use. Once you have acquired all the required items, empty the bong of water and remove any accessories attached to the bong, such as the bowl.
2. Rinse Your Bong
The first step is to rinse your bong with warm water. Pour out any stagnant water and rinse the inside and outside of the bong thoroughly. Do not forget to rinse the bowl and downstem to remove ash and any debris accumulated inside. Once the bong is free of any debris, prepare the cleaning solution.
3. Clean with Isopropyl Alcohol and Salt
Take a plastic baggie and fill it with coarse salt with a generous amount of isopropyl alcohol and shake it to mix the salt and alcohol together. After that, add the mixture to your bong and let it sit for at least 1 hour. If your bong is quite dirty, let it sit for several hours or even overnight. Once the cleaning solution has had enough time to soak in, you can begin the cleaning process. Gently shake the bong back and forth, making sure the solution coats every inch of the interior surface of your bong. If your bong has stubborn stains, use a pipe cleaner or brush to scrub the interior. Repeat the shaking and brushing process until your bong is clean.
4. Rinse Your Bong Again
Once you have removed all the stains from your bong, rinse it out again with hot water. Hold your bong under running water so that the water penetrates into every opening of your bong, flushing out any remaining salt crystals and alcohol. Rinse until all the residue is gone.
5. Dry Your Bong
Dry your bong by placing it upside down for 30 minutes or until it’s completely dry. Once it is entirely dry, re-attach any accessories that you removed before.
Keeping your bong clean is an essential aspect of enjoying a great smoking experience. By following these simple steps, you can keep your bong cleaner for longer and ensure your smoking sessions are as enjoyable as possible. Remember to clean your bong regularly to keep it in top condition, and to replace it if it is beyond repair. With these easy-to-follow steps, you can ensure your bong stays sparkling clean for countless times of smoking enjoyment.
Cleaning your bong will also help prevent the buildup of bacteria and other contaminants that can affect your smoking experience.
Start by separating the pieces of bong. You may need to use a pair of pliers if some parts are stuck together. Then, get rid of any ash or residue from the bowl and stem before submerging them in warm water with mild dish soap. Swirl the pieces around with your hands to remove any remaining residue, then place them on a clean towel to dry.
Next, you can use a pipe cleaner or cotton swab to get into all the nooks and crannies of your bong and clean off any build-up. Be sure to check for cracks or bubbles in the glass, and replace any parts that are beyond repair.
Finally, if your bong is made of plastic or acrylic, you should use a specialized cleaning solution to get rid of any bacteria and germs in the material. To make your own cleaner, simply mix 1/4 cup rubbing alcohol with 1/2 cup warm water and a tablespoon of baking soda. Put this solution into the bong and let it sit for 10 minutes before rinsing it out.
By following these simple steps, you can keep your bong free from dirt, bacteria, and other contaminants that can affect your smoking experience. Regularly cleaning your bong will also help to prevent any unpleasant odors and tastes from developing over time.